Mobile Suspended Laboratory Furniture
A popular system where a system approach is required offering flexibility, cleanliness, maneuverability and interchangeability
 Worktop supported by tough steel 40 x 40mm frame- Robust Construction
- Mobile cupboards allow access for floor clean
- Position of mobile units can be moved from laboratory to office without unloading
- Large range of base cupboard and drawer units
Mark Finn Laboratory Installations Mobile system uses the same tough powder coated steel frame to support the worktop and quality base cupboard and drawer units as our suspended system. The steel frames are fitted with 4 swivel castors, of which 2 are lockable, and can be moved without the need to unload their contents and locked into position when correctly placed.
We offer a free design and layout service, the start of a total service laboratory solution. We are here to help you.
Just contact Mark Finn for this free service with your laboratory dimensions and sizes and what you are looking for in your laboratory
|
MF40 500 mm cabinet
|
MF41 500 mm solvent / poisons / acids cabinet
|
MF42 500 mm short 4 drawer unit
|
MF43 500 mm short drawer and file unit
|
|
MF44 500 mm waste/sharps bin unit
|
MF45 500 mm sink unit
|
MF46 1000 mm solvent / poisons / acids cabinet
|
MF47 1000 mm single long drawer and cupboard unit
|
|
MF48 500 mm 2 short drawer and 1000 mm double cupboard
|
MF49 1000 mm double cupboard unit
|
MF50 1000 mm long 4 drawer unit
|
MF51 1000 mm long sink unit
|
|
This popular choice increases the layout flexibility provided. A further development is to have the worktops mounted on mobile table frames with mobile base units cupboards placed below. When used with a fixed electrical service backing it can provide a totally flexible system to meet changes in policy and space allocation.
Construction
- All mobile units are constructed by hand in our workshops utilizing 100% laminated 18mm MDF board and hardwood joints
- All worktops supported or units suspended from epoxy powder coated 40 x 40mm steel frame.
- All leading or exposed edges are moisture and knock resistant
- Decorated in any colour of your choice.
- All body, doors and drawer fronts are 18mm MDF colour laminated and edged, colour of your choice.
- Drawers have steel sides and a 15mm MDF bottom and back.
- Units to be completed with handles finished in colours of your choice.
- Choice of Trespa worktops to suit your requirements
|
