|
A tough, modern answer, suspended laboratory furniture is a flexible, dependable system, ideal for laboratories where hygiene in your industrial, healthcare, or educational laboratory is the most important concern. This range has been designed with HTM63 in mind.
The suspended system provides space under the cupboard for easy to access cleaning while the storage units can be moved within the system if your requirements in the laboratory change. The Trespa worktops are fixed to and supported directly by a industrial standard 40 x 40mm powder coated steel frame. The system has a robust construction and does not require any supporting steelwork to carry loads up to 240KG. If a larger load is required, this can be accommodated. The longest single length of Trespa worktop is 2500mm or 3000mm depending on best usage of material. For longer lengths we provide / fit biscuit joints and levelling plates to ensure the joints are water tight and of the highest quality. This provides a seamless worktop solution. The standard depth for a Trespa lab worktop is 750mm however we will manufacture to the size which suits your requirement. There is a choice of Trespa worktops colours to suit your requirements. Our cabinets, which are all made here at our factory in Yorkshire, are manufactured with carcasses that are constructed from 18mm MF MDF covered over with a waterproof decorative laminate which provide a durable and easy to clean surface. Our standard carcasses and door colours are grey or white. However we do offer non standard door colours and edging if are required. Please visit our Laboratory Cabinet Door Colours page to view the full range. The suspended units are designed to slide along the support frame as well as being are fully interchange i.e. the cabinets can be taken off the frame to leave a space or swapped for a different style of cabinet if required. Specification: Worktop: 16mm Trespa Athlon Frame: 40mm x 40mm x 2mm section Load: Up to 240KG (our standard frames can be adapted to take larger loads if required) All cabinets are hung on:
Cabinet Construction:
The standard suspended unit widths are 500mm and 1000mm and all finish at 600mm high as standard. Bespoke items can be made to fit your requirement if necessary. To receive a quote either email us at sales@mark-finn.co.uk or call 01535 602141. Send as much information as possible, a rough dimensioned layout sketch would be ideal. We usually turn quotes around within 24 hours. |
Fixed Suspended Furniture:
|
|
Free Design and Layout Service
We offer a free design and layout service, the start of your total laboratory solution. Use our 30 years of experience to help build your new lab. Give us as call to discuss you requirement or send us a rough dimensioned sketch of your layout with details of what you require. Alternatively download our Lab Planning Guide and return to us via email, fax or post. If you are interested in purchasing one off items this not a problem. Please visit our Products page to view our standard range of items. If you require references please contact or in the meanwhile check out our Case Studies page to find some happy customers. |
Free Layout and Design Service
|