Laboratory Base Cabinets

Welcome to our Laboratory Cabinets Furniture page. We specialise in supplying and installing fixed and loose laboratory cupboards and furniture. If you require supply only we ensure that all the items are manufactured and finished for you to install and assemble on delivery. No cutting and carving on site will be required.

Our lab furniture base cupboards are constructed from 18mm MDF to provide a durable and easy clean surface. If you require a harder wearing product for tough chemical environments we also manufacture the cabinets from 16mm Trespa Athlon. If you are unsure of your requirements and would like some guidance please give us a call and speak to one our team today. With a little bit of information we will be able to recommend the best materials to suit your environment. If you would like to view our furniture and products for yourself please get in touch to arrange a visit of our factory and showroom. We have built a fully working lab onsite to give you an idea of what we can achieve together.

PLEASE NOTE OUR STATIC BASE CABINETS are unique, in that they are rated to support an equally distributed load of 240kg  dead weight (the equivalent of 37 stone or 3 average men).

Standard Base Cabinet Specification
  • Fixed units are mounted on a 4 sided 18mm fixed plinth.
  • All cabinets are complete with an adjustable internal shelf
  • All cabinets are constructed by hand in our workshops utilizing 100% laminated 18mm MDF board and hardwood joints
  • All leading or exposed edges are moisture and knock resistant
  • All  doors and drawer fronts are 18mm MDF colour laminated. See the colour range page for more info. Laboratory Furniture Door Colours
  • All carcasses are manufactured from 18mm MDF laminated in white or grey as standard.
  • Drawers have steel sides and a 15mm MDF bottom and back
  • Units to be completed with Stainless Steel D Handles
  • All cabinets are complete with a fully easily removable 8mm MDF back
  • All 1000mm wide cabinets have a 20mm x 40mm steel support rail to ensure worktop integrity
  • Doors are hung on 270 degree opening coated steel hinges

Our standard (Heavy Duty Drawers) are constructed as follow
  • 2 Epoxy coated steel sides
  • 15mm MDF MF bottom
  • 15mm MDF MF back
These values make our units the ONLY choice for strength – longevity and value.

The units can be made to be free standing include tops or manufactured to allow worktop to be fitted on top. Typically we install 16mm Trespa worktops. The cabinets we manufacture are rated to take equal loads up 240kg therefore no performance will be lost if this is your preferred furniture system.

To get a quote either email us at sales@mark-finn.co.uk or call 01535 602141 for a Laboratory Furniture quote.

If you require mobile furniture check out our mobile cabinets page for more information.
​Unique to Mark Finn Lab Furniture:
All our 1000mm wide cupboards have a 2mm x 20mm x 40mm steel support rail to ensure worktop integrity and 240kg equipment support:

Laboratory Base Cabinet Range

We can manufacture furniture items such as cabinets, cupboards. draws and units to any size required. However as a guide our standard sizes are:

Single cupboard:             500mm x 500mm x 900mm High
Double cupboard:           1000mm x 500mm x 900mm High

If you can not see the item you are looking for from the selection below please send us a rough sketch of what you require. This can be emailed to sales@mark-finn.co.uk. We will then come back to you with a quote. If you can draw it, we can make.
MF1 - Double Laboratory Cupboard
MF2 - Double Cupboard & 2 Drawer 
MF3 - Double Cupboard & Single Drawer 
MF4 - Four Draw Unit
MF5 - Double Cupboard Sink Unit
MF6 - Solvent / Acid Cabinet Housing
MF8 - Single Sink Unit
MF9 - Service Bollard Unit
MF10 - Double Drawer & File Unit
MF11 - Single Cupboard & Drawer Unit
MF12 - Four Draw Unit
MF13 - Open Fronted Shelf Unit
MF14 - Waste Bin Unit
MF15 - Single Cupboard 
MF16 - Open Fronted Gratnell Tray Unit
MF30 - Single Tall Cupboard Unit
MF31 - Double Tall Cupboard Unit