Fixed Suspended Laboratory Furniture
Tough, dependable system, ideal for laboratories where hygiene your most important concern
 Suspended on a tough steel frame- Robust Construction
- Worktops supported by steel frame for clear under unit access
- Position of suspended units can moved
Mark Finn laboratory Installations worktop is supported by a heavy-duty powder coated steel frame. Cupboard and drawer units are suspended from the steel frame beneath the Trespa work top. The suspended units have been designed to provide clear access to the floor for cleaning, making this design ideal for laboratories where hygiene is of paramount importance.
We offer a free design and layout service, the start of a total service laboratory solution. We are here to help you.
Just contact Mark Finn for this free service with your laboratory dimensions and sizes and what you are looking for in your laboratory
The Trespa worktops come in standard 3m sheets and can be cut your specified widths, usually 750mm. The suspended units come in standard 500 and 1000mm. Worktops are usually 900mm high in laboratories. Island units where units are back to back the worktop is usually 1500mm wide
Cupboards are 600mm deep and approximately 200mm under the units to the floor.
|
MF40 500 mm cabinet
|
MF41 500 mm solvent / poisons / acids cabinet
|
MF42 500 mm short 4 drawer unit
|
MF43 500 mm short drawer and file unit
|
|
MF44 500 mm waste/sharps bin unit
|
MF45 500 mm sink unit
|
MF46 1000 mm solvent / poisons / acids cabinet
|
MF47 1000 mm single long drawer and cupboard unit
|
|
MF48 500 mm 2 short drawer and 1000 mm double cupboard
|
MF49 1000 mm double cupboard unit
|
MF50 1000 mm long 4 drawer unit
|
MF51 1000 mm long sink unit
|
This popular choice increases the layout flexibility provided. A further development is to have the worktops mounted on mobile table frames with mobile base units cupboards placed below. When used with a fixed electrical service backing it can provide a totally flexible system to meet changes in policy and space allocation.
Construction
- Worktop supported by epoxy powder coated 40 x 40mm steel frame.
- All suspended units are constructed by hand in our workshops utilizing 100% laminated 18mm MDF board and hardwood joints
- Decorated in any colour of your choice.
- All leading or exposed edges are moisture and knock resistant
- All body, doors and drawer fronts are 18mm MDF colour laminated and edged, colour of your choice.
- Drawers have steel sides and a 15mm MDF bottom and back.
- Units to be completed with handles finished in colours of your choice.
- Choice of sink types, taps and Trespa worktops to suit your requirements.
|
 |
 |
|
Mark Finn Laboratory Installations
19 Midland Mills
Crosshills
Keighley
West Yorkshire
BD20 7DT
|
|
|
|
|
