top of page

Trespa Worktops & Countertops

Cheap Prices - Fast UK Wide Delivery - Expert Fabrication

Welcome to the home of Laboratory Trespa Worktops UK. Anyone who has worked with Trespa knows how great of a countertop it is. They may also know how hard it can be to fabricate as a Lab Worktop. Luckily after years of practice, we are the leading experts in the UK. Mark Finn specialises in fabricating Trespa worktops to your dimensions. We can supply Trespa TopLab ​BASE (Athlon) and Trespa TopLab PLUS as full sheets or as finished panels cut to size and finished as required. Trespa BASE is covered by a 10 warranty however typical lifespan is 25+ years. Need a Trespa worktop cost, price or quote? Send us an email or fill in the contact form.

Examples of what we manufacture with TRESPA:

  • ​Fabricate Multiple Metres of Worktop & Upstand

  • Worktop Jointing (including biscuits and plates)

  • Finished Edges (2mm chamfer and polish as standard)

  • Trespa Cabinets & Cupboards

  • Kitchen Trespa Phenolic Resin Countertops

  • Bunded countertops

  • Worktop Cut-Outs

  • Sink Drainer Grooves

  • Sink Cut-Outs

  • All panels are delivered to the site finished and ready for installation. No cutting or carving will be required. 

To receive a quote either email us your enquiry with a rough sketch & postcode to or call 01535 602141. Speak to the experts today

Trespa Worktop.JPG

Benefits of our service:

  • Saves you time on site

  • Reduces creation of dust / mess. (Trespa creates a lot of debris when cut)

  • Save buying or destroy precious tools / bits

  • Reduce potential headaches (Trespa is an unforgiving material. Mistakes are hard to fix on site)


If the requirement is supply only, we will send installation instructions. We are also available on the phone if advise from our experts is needed.

We take your ideas from basic concept to design to manufacture

rough lab worktop drawing.jpg
AutoCAD Drawing of Lab Worktop Layout.JPG
Installed Trespa Worktop with Sink 29443 (2).jpg

Customer Sketch

Drawing For Approval

Finished Product

Supplied as standard (where required) 

Biscuit joint.jpg

Trespa Biscuit Joint

trespa worktop joint plate.jpg

Steel Jointing / Levelling Plate

Trespa worktop black edge.gif

Standard Finished Trespa Edge. Polish & 2mm Chamfer

Optional Extras

Trespa Drainer Detail-compressed.jpg

Sink Drainer Grooves 

trespa fabrication cut out.jpg

Complex worktop cut-outs for sinks or machinery   

Trespa Worktop with 50mm trespa upstand.jpg

50mm Trespa Upstand

(available on request)

Supplied loose.

28852 Trespa Bunded Worktop.jpg

Bunded Trespa Worktop

What is Trespa?

Trespa is a flat one-piece panel based on thermosetting resins, homogeneously reinforced with cellulose fibres and manufactured under high pressure and temperature. Using special techniques, the panels have an integrated, decorative surface with melamine-impregnated paper. It is ideal for laboratory environments as it resists aggressive chemicals for up to 6 hours before it needs to be cleaned off, enough time to cover the majority of spillage cases. The easy-to-clean nature combined with good chemical resistance makes Trespa ideal for use in various laboratory, pharmaceutical, cosmetic, electronic and food production environments. It's an ideal alternate for phenolic solid grade laminate. 

There are two types of Trespa Worktop:

Both lab countertops are available in 16mm or 20mm panel thickness. However 16mm Trespa BASE is used in over 80% of Lab's in the UK therefore we always use this as our for first choice for Lab Worktops. It provide the best value for money but we can provide any of the other options if required. For more information please see below.

Here are a few guides we have put together if you require more information on the material:

What is Trespa TopLab BASE?
Machining Trespa



Trespa Logo.PNG
trespa worktops countertops 27825.jpg

Trespa TopLab BASE (Athlon)

Chemical resistance
Trespa Base (Athlon) has good resistance to organic solvents such as acetone, toluene, xylene and similar substances. The panel is also resistant to disinfectants and detergents, food juices and dyes. These affect neither the properties nor the appearance of the panel.

Moisture resistance
Trespa Base (Athlon) is not affected by moisture, mold and rot do not occur. Both the surface and the core are made of thermosetting resins, which make them impervious to moisture.

Wear and Tear
The special surface structure and durability of Trespa Base (Athlon) make it highly scratch-resistant. The panel retains its excellent properties for a very long time, even after intensive use. Tests by EN 438-2/91 prove that Trespa Base (Athlon) is highly resistant to wear. It is ideal for heavy-duty applications.

Easy to clean
The closed non-porous surface of Trespa Base (Athlon) does not attract dirt. Trespa Base (Athlon) panels can be cleaned with either normal cleaning agents or with strong disinfectants because the material is chemically resistant. Graffiti can easily be removed with an organic solvent without the danger of affecting the colour.

What is Trespa Made Of?
Trespa worktop

​Trespa TopLab PLUS

Trespa TopLab PLUS is much like BASE however is specified where you need greater resistance to aggressive chemicals, more like 24 hours than the 6 hours BASE affords. It is a self-supporting flat panel with a cellulose fibre reinforced phenolic resin core. Each panel has an integrated, decorative surface based on pigmented, electron beam cured resins which are resistant to the most aggressive chemicals, and easy to clean and maintain.

Manufactured with Trespa’s unique Electron Beam Curing (EBC) technology, Trespa® Toplab®PLUS surface is easy to clean and shows high resistance to a large number of aggressive chemicals. It also has inherent antibacterial properties without the addition of microbial additives. Trespa® Toplab®PLUS panels provide an ideal choice in environments where hygiene, avoidance of contamination, sustainability, ergonomics and safety are of importance. Trespa® Toplab®PLUS is extensively used in a wide variety of lab environments worldwide, including chemical, physical, analytical and microbiological laboratories.

Why Use Trespa

Thanks to their outstanding quality and innovative design, laboratories using TopLab® have been recognized by most recent editions of the prestigious R&D Lab of the Year Competition. The Trespa® TopLab® line uses in-house Electron Beam Curing (EBC) technology to create a closed surface that is hygienic, sturdy and easy to clean. The impact, moisture and chemical resistance of these high-quality panels, which are made with natural fibres and thermosetting resins, not only extend their product life but also keep them looking vibrant. This engineered durability is why Trespa offers a 10-year warranty.

Trespa® TopLab® provides attractive and durable scientific surfaces in an award-winning solution that’s certified for reliability and environmental impact under the GREENGUARD Gold Certification and ISEGA Certification programs.

Trespa International is a leading innovator in the field of architectural materials. Thanks to 60 years of global experience and product innovation, Trespa is recognized internationally as a premier developer of high-quality panels for scientific surface solutions.

The preferred choice in durable and sustainable scientific environments

In today’s laboratories and functional environments is important to choose the right material for your surfaces. Regardless from which Trespa® TopLab® product you choose, these high-quality panels fabricated with natural fibres and thermosetting resins will extend the lifetime of your project, providing stunning aesthetics and long lasting performances.

Get In Touch 😃👍

👋😎Hello & thank you for the enquiry. If you have any drawings, please reply to the auto response email you will receive. Drawings help up process your quote quicker.

bottom of page