Fixed Traditional Laboratory Furniture

The most economical option where the worktops are fixed directly to the cupboard units.

Mark Finn Installations Fixed units are our most popular and has a large range. The worktops are supported directly on the cupboard units. It is of robust construction and does not require any supporting steelwork to carry the heaviest of bench loads. It is particularly suitable for laboratories which need an economical layout and where flexibility of storage is not critical. Access to the service void is via removable back panels of the cupboard units.

We offer a free design and layout service, the start of a total service laboratory solution. We are here to help you.

Just contact Mark Finn for this free service with your laboratory dimensions and sizes and what you are looking for in your laboratory

Our Trespa worktops come in standard 3m sheets and can be cut your specified widths, usually 750mm. The base units come in standard 500 and 1000mm. Worktops are usually 900mm high in laboratories. Island units where units are back to back the worktop is usually 1500mm wide.

Construction.

• All units are mounted on a 4 sided 18mm moisture resistant plinth (usually black).
• All units are constructed by hand in our workshops utilizing 100% laminated 18mm MDF board and hardwood joints
• Decorated in any colour of your choice.
• All leading or exposed edges are moisture and knock resistant
• Cupboards and drawer fronts either in light grey (standard) or any colour of your choice.
• All body, doors and drawer fronts are 18mm MDF colour laminated and edged, colour of your choice.
• Drawers have steel sides and a 15mm MDF bottom and back.
• Units to be completed with handles finished in colours of your choice.
• Choice of sink types, taps and Trespa worktops to suit your requirements