Trespa Worktops

Laboratory Worktops & Countertops

Cheap Prices - Fast UK Wide Delivery - Expert Fabrication

Welcome to the UK leading fabricator of Laboratory Trespa Worktops. Anyone who has worked with Trespa knows how great a countertop it is. They may also know how hard it can be to fabricate a Lab Worktop. They are the industry go-to for chemical-resistant worktops. Luckily, after years of practice, we are the leading experts in the UK. Mark Finn specialises in fabricating Trespa worktops to your dimensions. We can supply Trespa TopLab BASE and Trespa TopLab PLUS as full sheets or as finished panels cut to size and finished as required. Trespa BASE is covered by a 10 warranty; however typical lifespan is 25+ years. Do you need a Trespa worktop cost, price or quote? Please email us or fill in the contact form to get a Trespa cost per m2 UK.

Examples of what we manufacture with TRESPA:

Fabricate Multiple Metres of Worktop & Upstand
Worktop Jointing (including biscuits and plates)
Finished Edges (2mm chamfer and polish as standard)
Trespa Cabinets & Cupboards
Kitchen Trespa Phenolic Resin Countertops
Bunded countertops
Worktop Cut-Outs
Sink Drainer Grooves
Sink Cut-Outs
All panels are delivered to the site finished and ready for installation. No cutting or carving will be required.

✅ Get a Quote Today

Quick responses. Expert advice. UK-made lab tables, built to last.

👉 Request a Quote or - Speak to an Expert 01535 602141

What we need: a rough plan sketch of the requirement & delivery postcode

Benefits of our service:

Saves you time on site
Reduces creation of dust / mess. (Trespa creates a lot of debris when cut)
Save buying or destroy precious tools / bits
Reduce potential headaches (Trespa is an unforgiving material. Mistakes are hard to fix on site)

If the requirement is supply only, we will send installation instructions. We are also available on the phone if advise from our experts is needed.

We take your ideas from basic concept to design to manufacture

Installed Trespa Worktop with Sink 29443

Customer Sketch

Drawing For Approval

Finished Product

Laboratory Grade Worktops

Supplied as standard (where required)

Trespa Biscuit Joint

Steel Jointing / Levelling Plate

Standard Finished Trespa Edge. Polish & 2mm Chamfer

Optional Extras

Sink Drainer Grooves

Complex worktop cut-outs for sinks or machinery

50mm Trespa Upstand

(available on request)

Supplied loose.

Bunded Trespa Worktop

Looks good? Send Email Enquiry

What is Trespa?

Trespa is a flat one-piece panel based on thermosetting resins, homogeneously reinforced with cellulose fibres and manufactured under high pressure and temperature. Using special techniques, the panels have an integrated, decorative surface with melamine-impregnated paper. It is ideal for laboratory environments as it resists aggressive chemicals for up to 6 hours before it needs to be cleaned off, enough time to cover the majority of spillage cases. The easy-to-clean nature combined with good chemical resistance makes Trespa ideal for use in various laboratory, pharmaceutical, cosmetic, electronic and food production environments. It's an ideal alternate for phenolic solid grade laminate and ideal for chemical resistant worktops.

There are two types of Trespa Worktop:

TopLab BASE - Colour Range: 16mm Trespa TopLab BASE

TopLab PLUS - Colour Range: 16mm Trespa TopLab PLUS

Both lab countertops are available in 16mm or 20mm panel thickness. However 16mm Trespa BASE is used in over 80% of Lab's in the UK therefore we always use this as our for first choice for Lab Worktops. It provide the best value for money but we can provide any of the other options if required. For more information please see below.

Here are a few guides we have put together if you require more information on the material:

What is Trespa TopLab BASE?
Machining Trespa

Trespa TopLab BASE (Athlon)

Chemical resistance
Trespa Base (Athlon) has good resistance to organic solvents such as acetone, toluene, xylene and similar substances. The panel is also resistant to disinfectants and detergents, food juices and dyes. These affect neither the properties nor the appearance of the panel.

Moisture resistance
Trespa Base (Athlon) is not affected by moisture, mold and rot do not occur. Both the surface and the core are made of thermosetting resins, which make them impervious to moisture.

Wear and Tear
The special surface structure and durability of Trespa Base (Athlon) make it highly scratch-resistant. The panel retains its excellent properties for a very long time, even after intensive use. Tests by EN 438-2/91 prove that Trespa Base (Athlon) is highly resistant to wear. It is ideal for heavy-duty applications.

Easy to clean
The closed non-porous surface of Trespa Base (Athlon) does not attract dirt. Trespa Base (Athlon) panels can be cleaned with either normal cleaning agents or with strong disinfectants because the material is chemically resistant. Graffiti can easily be removed with an organic solvent without the danger of affecting the colour.

What is Trespa Made Of?

Trespa TopLab PLUS

Trespa TopLab PLUS is much like BASE however is specified where you need greater resistance to aggressive chemicals, more like 24 hours than the 6 hours BASE affords. It is a self-supporting flat panel with a cellulose fibre reinforced phenolic resin core. Each panel has an integrated, decorative surface based on pigmented, electron beam cured resins which are resistant to the most aggressive chemicals, and easy to clean and maintain.

Manufactured with Trespa’s unique Electron Beam Curing (EBC) technology, Trespa® Toplab®PLUS surface is easy to clean and shows high resistance to a large number of aggressive chemicals. It also has inherent antibacterial properties without the addition of microbial additives. Trespa® Toplab®PLUS panels provide an ideal choice in environments where hygiene, avoidance of contamination, sustainability, ergonomics and safety are of importance. Trespa® Toplab®PLUS is extensively used in a wide variety of lab environments worldwide, including chemical, physical, analytical and microbiological laboratories.

Why Use Trespa

Thanks to their outstanding quality and innovative design, laboratories using TopLab® have been recognized by most recent editions of the prestigious R&D Lab of the Year Competition. The Trespa® TopLab® line uses in-house Electron Beam Curing (EBC) technology to create a closed surface that is hygienic, sturdy and easy to clean. The impact, moisture and chemical resistance of these high-quality panels, which are made with natural fibres and thermosetting resins, not only extend their product life but also keep them looking vibrant. This engineered durability is why Trespa offers a 10-year warranty.

Trespa® TopLab® provides attractive and durable scientific surfaces in an award-winning solution that’s certified for reliability and environmental impact under the GREENGUARD Gold Certification and ISEGA Certification programs.

Trespa International is a leading innovator in the field of architectural materials. Thanks to 60 years of global experience and product innovation, Trespa is recognized internationally as a premier developer of high-quality panels for scientific surface solutions.

The preferred choice in durable and sustainable scientific environments

In today’s laboratories and functional environments is important to choose the right material for your surfaces. Regardless from which Trespa® TopLab® product you choose, these high-quality panels fabricated with natural fibres and thermosetting resins will extend the lifetime of your project, providing stunning aesthetics and long lasting performances.