Modern Laboratory Furniture
Fixed Benching with Mobile Cabinets
Our Fixed Modern Furniture System is a flexible solution which allows working environments to change as required.
The Trespa Worktops are fixed to and supported directly by an industrial standard 40 x 40mm powder-coated steel frame. The system has a robust construction and does not require any supporting steelwork to carry loads up to 240KG. If a larger load is required, this can be accommodated.
After the worktop and frames have been installed you can then populate the area with our range of fixed Lab Cabinets or Mobile Lab Cabinets. Many of our clients prefer this system as they can spread the cost of the work out over more than one budget cycle. For example, purchasing the worktops and frames in Q1 and then the furniture in Q4 when more funds are available. Also, it allows the movement of furniture to other departments when required offering a flexible storage solution. Perfect for an expanding company. This system can also be used for island units and peninsular benching.
The longest single length of the Trespa worktop is 2500mm or 3000mm depending on the best usage of material. For longer lengths, we provide/fit biscuit joints and levelling plates to ensure the joints are watertight and of the highest quality. This provides a seamless worktop solution. The standard depth for a Trespa lab worktop is 750mm however we will manufacture to the size which suits your requirement. There is a choice of Trespa Worktops Colours to suit your requirements.
Our cabinets, which are all made here at our factory in Yorkshire, are manufactured with carcasses that are constructed from 18mm MF MDF covered over with a waterproof decorative laminate which provides a durable and easy-to-clean surface. Our standard carcasses and door colours are grey or white. However, we do offer non-standard door colours and edging if required. Please visit our Laboratory Cabinet Door Colours page to view the full range.
The standard mobile units' width is 500mm and 1000mm and all finish at 840mm high as standard. Bespoke items can be made to fit your requirement if necessary.
Modern Cabinet Construction:
All units are mounted on a 4no 75mm rubber coated castors
All units are constructed by hand in our workshops utilising 100% laminated 18mm MDF board and hardwood joints
All leading or exposed edges are moisture and knock resistant
Drawers have steel sides and a 15mm MDF bottom and back.
Units to be completed with Stainless D Shaped handles.
Access to the service void is via a removable back panel on the cabinets
To receive a quote either email us at firstname.lastname@example.org or call 01535 602141. Send as much information as possible, a rough dimensioned layout sketch would be ideal. We usually turn quotes around within 24 hours.
Click on below images for case studies
Free Design and Layout Service
We offer a free design and layout service, the start of your total laboratory solution. Use our 35+ years of experience to help build your new lab. Give us a call to discuss your requirement or send us a rough dimensioned sketch of your layout with details of what you require. Alternatively, download our Lab Planning Guide and return it to us via email, fax or post.
If you are interested in purchasing one-off items this is not a problem. Please visit our Products page to view our standard range of items.
If you require references please contact or in the meanwhile check out our Case Studies page to find some happy customers.